ESAB OK ARISTOROD 12.50 DIAM. 0.8 KG.15 COIL MIG MAG WIRE FOR NON-COPPER-PLATED CARBON STEELS
OK AristoRod 12.50 is a non-copper coated, low alloy Mn-Si G3Si1/ER70S-6 wire for MAG welding of non-alloy steels such as those for general construction, automotive components, tanks and shipbuilding. OK AristoRod 12.50 is produced with a unique technology (ASC - Advanced Surface Characteristics) which allows it to be classified in terms of performance and efficiency at the highest levels especially in mechanized and/or robotic MAG welding. Key features also include excellent arc ignition properties, sheath flow and a very stable arc even at high currents. Minimal spatter, low smoke emissions and corrosion resistance equal to that obtained with copper-plated MAG wires.
ESAB OK ARISTOROD 12.50 DIAM. 0.8 KG.15 COIL MIG MAG WIRE FOR NON-COPPER-PLATED CARBON STEELS
€58.55
1A50086900
OK AristoRod 12.50 is a non-copper coated, low alloy Mn-Si G3Si1/ER70S-6 wire for MAG welding of non-alloy steels such as those for general construction, automotive components, tanks and shipbuilding. OK AristoRod 12.50 is produced with a unique technology (ASC - Advanced Surface Characteristics) which allows it to be classified in terms of performance and efficiency at the highest levels especially in mechanized and/or robotic MAG welding. Key features also include excellent arc ignition properties, sheath flow and a very stable arc even at high currents. Minimal spatter, low smoke emissions and corrosion resistance equal to that obtained with copper-plated MAG wires.
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Typical tensile properties
| Lengthening | Protective gas | Tensile strength | Yield strength | Status | Test temperature | Trial period |
| 30% | AWS CO2 (C1) | 530 MPa | 430 MPa | As Welded | - | - |
| 26 % | EN 80Ar/20CO 2 (M21) | 560 MPa | 470 MPa | As Welded | - | - |
| 28% | EN 80Ar/20CO 2 (M21) | 495 MPa | 370 MPa | Stress Relieved | 620 °C | 15 hours |
| 25% | EN CO2 (C1) | 540 MPa | 440 MPa | As Welded | - | - |
Proprietà proof Charpy con intaglio a V
| Protective gas | Status | Test temperature | Tenacity value | Test Condition Temp | Test Condition Time |
| AWS CO2 (C1) | As Welded | -30 °C | 75 J | - | - |
| EN 80Ar/20CO 2 (M21) | As Welded | 20 °C | 130 J | - | - |
| EN 80Ar/20CO 2 (M21) | As Welded | -20 °C | 120 J | - | - |
| EN 80Ar/20CO 2 (M21) | As Welded | -30 °C | 100 J | - | - |
| EN 80Ar/20CO 2 (M21) | As Welded | -40 °C | 90 J | - | - |
| EN 80Ar/20CO 2 (M21) | As Welded | -50 °C | 70 J | - | - |
| EN 80Ar/20CO 2 (M21) | Stress Relieved | 20 °C | 120 J | 620 | 15 |
| EN 80Ar/20CO 2 (M21) | Stress Relieved | -20 °C | 90 J | 620 | 15 |
| EN CO2 (C1) | As Welded | 20 °C | 110 J | - | - |
| EN CO2 (C1) | As Welded | -30 °C | 75 J | - | - |
Weld metal analysis
| CO2 (C1) | |||
| Mn | C | Yes | Ti+Zr |
| - | - | - | <0.01% |
| 80Ar/20CO 2 (M21) | |||
| Mn | C | Yes | Ti+Zr |
| - | - | - | <0.01% |
| wire composition | |||
| Mn | C | Yes | Ti+Zr |
| 1.46 % | 0.08% | 0.85% | - |
Deposit dates
| Amp | Diameter | Deposit rate | Velocità di trassamento del filo | Volt |
| 60-200A | 0.8 mm | 0.8-2.3 kg/h | 3.2-10 m/min | 18-24V |
| 70-250A | 0.9 mm | 0.9-3.5 kg/h | 3.0-12 m/min | 18-26V |
| 80-300A | 1.0 mm | 1.0-5.5 kg/h | 2.7-15 m/min | 18-32V |
| 100-350A | 1.14 mm | 1.2-7.0 kg/h | 2.6-15 m/min | 18-34V |
| 120-380A | 1.2 mm | 1.3-8.0 kg/h | 2.5-15 m/min | 18-35V |
| 130-400A | 1.32 mm | 1.5-8.5 kg/h | 2.4-15 m/min | 19-35V |
| 150-420 A | 1.4 mm | 1.6-8.7 kg/h | 2.3-12 m/min | 22-36V |
| 225-550 A | 1.6 mm | 2.1-9.4 kg/h | 2.3-10 m/min | 28-38V |
| 300-650 A | 2.0 mm | 4.4-10.2 kg/h | 3.0-7 m/min | 32-44V |
| Approvals: | ABS; 3Y SA; BV; SA3YM; CE; EN 13479; DB; 42.039.29; DNV-GL; III YMS; LR; 3YS H15; PRS; 3YS; RS; 3Y40MS; VdTÜV; 10052; CWB; PV, ZG; BG 49A 3 C1 S6 (BG 49A 3 C G6); EXP; ZG; YGW12 (C1); NAKS/HAKC; PV; 1.0-1.6 mm; NAKS/HAKC; ZG; 1.2-1.6 mm; RINA; ZG; 3Y S; RINA; PV; 3Y S |
| Classifications: | EN ISO 14341-A; G 38 3 C1 3Si1; Weld Metal; EN ISO 14341-A; G 42 4 M20 3Si1; Weld Metal; EN ISO 14341-A; G 42 4 M21 3Si1; Weld Metal; EN ISO 14341-A; G 3Si1; Wire Electrode; SFA/AWS A5.18; ER70S-6; Wire Electrode; CSA W48; BG 49A 3 C1 S6; Wire Electrode; JIS Z 3312; YGW 12 (C1); Wire Electrode |
No approvals are specific for each productive site.
| Alloy type: | Carbon-manganese steel (Mn/Si-alloyed) |
1A50086900
Related products
