OK ARISTOROD 69 DIAM 1.0 ESAB WIRE FOR WELDING HIGH STRENGTH STEELS 18 KG REEL
Welding of high tensile strength steels such as Weldox 700.
OK AristoRod™ 69 is a low alloyed, non-copper coated wire of analysis 0.3Cr-1.4Ni-0.25Mo suitable for welding high tensile strength steels having a minimum yield strength of 690 MPa and good low temperature toughness requirements.
OK ARISTOROD 69 DIAM 1.0 ESAB WIRE FOR WELDING HIGH STRENGTH STEELS 18 KG REEL
€142.29
VAT included
1B29106910
Welding of high tensile strength steels such as Weldox 700.
OK AristoRod™ 69 is a low alloyed, non-copper coated wire of analysis 0.3Cr-1.4Ni-0.25Mo suitable for welding high tensile strength steels having a minimum yield strength of 690 MPa and good low temperature toughness requirements.
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Typical tensile properties
| Stretching | Shielding gas | Tensile strength | Yield strength | State | Test temperature | Test time |
| 17% | AWS 80Ar/ 20CO2 (M21) | 805 MPa | 715 MPa | As Welded | - | - |
| 19% | EN 80Ar/20CO 2 (M21) | 800 MPa | 730 MPa | As Welded | - | - |
| 20% | EN 80Ar/20CO 2 (M21) | 750 MPa | 690 MPa | Stress Relieved | 620 °C | 15 hr |
Charpy V-notch test properties
| Shielding gas | State | Test temperature | Tenacity value | Test Condition Temp | Test Condition Time |
| AWS 80Ar/ 20CO2 (M21) | As Welded | -30 °C | 80 J | - | - |
| AWS 80Ar/ 20CO2 (M21) | As Welded | -40 °C | 60 J | - | - |
| EN 80Ar/20CO 2 (M21) | As Welded | 20 °C | 100 J | - | - |
| EN 80Ar/20CO 2 (M21) | As Welded | -40 °C | 73 J | - | - |
| EN 80Ar/20CO 2 (M21) | Stress Relieved | 20 °C | 130 J | 620 | 15 |
| EN 80Ar/20CO 2 (M21) | Stress Relieved | -20 °C | 60 J | 620 | 15 |
| EN 80Ar/20CO 2 (M21) | Stress Relieved | -30 °C | 60 J | 620 | 15 |
Weld Metal Analysis
| wire composition | |||||
| Mn | Mo | C | Yes | No | Cr |
| 1.54 % | 0.24 % | 0.089 % | 0.53 % | 1.23 % | 0.26 % |
Deposit data
| Amp | Diameter | Deposit rate | Wire drag speed | Volt |
| 80-280 A | 0.8mm | 1-5.4 kg/h | 2.7-14.7 m/min | 18-28 V |
| 80-280 A | 0.9mm | 1-5.4 kg/h | 2.7-14.7 m/min | 18-28 V |
| 80-280 A | 1.0mm | 1-5.4 kg/h | 2.7-14.7 m/min | 18-28 V |
| 120-350 A | 1.2 mm | 1.5-6.6 kg/h | 2.7-12.4 m/min | 20-33 V |
| 225-480 A | 1.6mm | 3.3-0 kg/h | 3.1-8.1 m/min | 26-38 V |
| Approvals: | ABS; ER 110S-G (M21); THERE IS; EN 13479; DB; 42.039.33; DNV-GL; IV Y69MS (M21); VdTÜV; 11837; NAKS/HAKC; 1.2MM |
| Classifications: | EN ISO 16834-A; G 69 4 M Mn3Ni1CrMo; EN ISO 16834-A; G Mn3Ni1CrMo; Wire Electrode; SFA/AWS A5.28; ER110S-G; Wire Electrode |
Approvals are specific to each production site.
| Alloy Type: | Low alloyed (1.4 % Ni, 0.3 % Cr, 0.3 % Mo) |
1B29106910
Related products
